Service hotline：
010-51669912
010-51669912
time：2020-12-14 browse：second
General PS10SR-2380 pressure transducer is produced by inserting an OEM piezoresistive pressure sensor into stainless steel housing. Due to stainless steel pressure port and housing, the product has good media compatibility, stable performance and high accuracy.The product that has M20×1.5 male pressure port,end face sealing gasket, it can be used for pressure measurement of dynamic or static gas and liquid media. Flush diaphragm PS10SR-2380 pressure transducer has G1/2 male pressure port and end face seal fluororubber sealing gasket, it can be widely applied in Food, Medicine, Sanitation or other fields where is easy to be dirty.
?Full stainless steel construction;
?Thread connection optional;
?Constant current supply;
?Compensating zero and FS thermal error by laser trimming;
?Selecting solid piezoresistive pressure sensor, high reliability and stability;
?Cable connection or plug connection.
| Pressure Range | -0.1MPa...0~0.02MPa...100MPa |
| Over-Pressure | 1.5 times FS or 110MPa (min.value is valid） |
| Power Supply | 1.5mA DC |
| Zero output | ≤ ±2mV DC |
| FS Output | ≥70mV DC(0~20kPa, ≥50mV DC) |
| Accuracy | ±0.1%FS(min.) ±0.25%FS(typ.) ±0.5%FS(max.) |
| Long-term stability | ±0.3%FS/year |
| Compensation temp. | 0℃~50℃ |
| Operation temp. | -30℃~80℃; -10℃~70℃(Cable) |
| Storage temp. | -40℃~120℃; -20℃~85℃(Cable) |
| Zero temp. coefficient | ±0.02%FS/℃(typical) ±0.04%FS/℃(max.) |
| FS temp. coefficient | ±0.02%FS/℃(typical) ±0.04%FS/℃(max.) |
| Housing | Stainless steel 1Cr18Ni9Ti |
| Diaphragm | Stainless steel 316L |
| O-ring | Fluororubber |
| Cable | Φ7.2mm PE |
| Response time(10%~90%) | ≤1ms |
| Insulation | 100MΩ, 100V DC |
| Protection | IP65 |
| Order Guide | |||||||
| PS10SR-2380 | Piezoresistive Pressure Transducer | ||||||
| Code | Pressure Range | Remark | Code | Pressure Range | Remark | ||
| 0B | 0~20kPa | G | 12 | 0~2MPa | G、A | ||
| 0A | 0~35kPa | G | 13 | 0~3.5MPa | G、A、S | ||
| 02 | 0~70kPa | G、A | 14 | 0~7MPa | S | ||
| 03 | 0~100kPa | G、A | 15 | 0~10MPa | S | ||
| 07 | 0~200kPa | G、A | 17 | 0~20MPa | S | ||
| 08 | 0~350kPa | G、A | 18 | 0~35MPa | S | ||
| 09 | 0~700kPa | G、A | 19 | 0~70MPa | S | ||
| 10 | 0~1000kPa | G、A | 20 | 0~100MPa | S | ||
| Code | Pressure Type | ||||||
| G | Gauge | ||||||
| A | Absolute | ||||||
| S | Sealed Gauge | ||||||
| Code | Electric connection | ||||||
| I | Plug connection | ||||||
| II | Cable connection | ||||||
| Cable length (m) | 1.5m cable is free of charge; the extra cable should be paid additionally. | ||||||
| Code | Pressure Port | ||||||
| PC1 | Flush diaphragm,M20×1.5 male | ||||||
| PC3 | Flush diaphragm,G1/2 male | ||||||
| C1 | M20×1.5 male,end face sealing | ||||||
| C5 | M20×1.5 male,waterline sealing | ||||||
| Code | Special measurement | ||||||
| N | Gauge type can be used to measure negative pressure (-100KPa~0KPa) | ||||||
| PS10SR-2380 | 10 | G | II | 5 | PC1 | N | the whole spec. |
PS10SR-2380 pressure transducer can be widely applied in Food, Medicine, Sanitation or other fields where is easy to be dirty.
Telephone：010-51669912
Mobile phone：15910733293
Zip code：101105
Fax：010-51669912-2
Address：NO. 20, III, Liandong Valley, Yongle Development Zone, Tongzhou District, Beijing, China
current location：
